Extremeswitching X870 Series Switch Leds - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

ExtremeSwitching X870 Series Switch LEDs

Using the optional Switch Port Speed License, these ports can be upgraded to unrestricted 100-
gigabit mode in groups of six ports per license. Up to four Switch Port Speed Licenses can be
applied for each X870-96x-8c switch.
•
RJ45 Ethernet management port.
•
USB port for access to external storage.
•
USB console port.
•
RJ45 RS-232c serial console port used to connect a terminal and perform local management.
•
LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their
operation, see
Figure 113: ExtremeSwitching X870-96x-8c Front Panel
1 = Precision Timing ports (not supported)
2 = Storage port: micro USB A
3 = Console port: micro USB B
The rear panel of the ExtremeSwitching X870-96x-8c switch includes:
•
Six replaceable fan modules.
•
Two power supply bays for either AC or DC power supplies.
Figure 114: ExtremeSwitching X870-96x-8c Rear Panel
1 = Grounding lug
2 = Fan modules
ExtremeSwitching X870 Series Switch LEDs
The following sections describe the meanings of the LEDs on the ExtremeSwitching X870 series
switches.
116 ExtremeSwitching Hardware Installation Guide
ExtremeSwitching X870 Series Switch LEDs on page 116.
4 = QSFP28/QSFP+ Ethernet ports
5 = Console port: RJ45
6 = Ethernet management port: RJ45
3 = AC power supplies
ExtremeSwitching Switches