Installing Optional Components; Pluggable Transceiver Modules; Other Optional Components; What To Do Next - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

Installing Your Extreme Networks Switch
To determine which internal power supplies are compatible with your switch, see
Power Supplies

Installing Optional Components

After the switch is secured to the rack or cabinet, install optional components.

Pluggable Transceiver Modules

Extreme Networks offers several optical transceiver modules for transmitting and receiving data over
optical fiber rather than through electrical wires. Install these modules using the instructions in
Networks Pluggable Transceivers Installation

Other Optional Components

To install other optional components – port option cards, versatile interface modules (VIMs), and
stacking modules – refer to the instructions in

What to Do Next

After you have installed optional components, if your switch comes with an installed power supply, skip
to Connecting Power to the Switch
If your switch does not come with an installed power supply, install one or two power supplies using the
instructions in
To see which internal power supplies are compatible with your switch, see

Installing Internal Power Supplies

If your switch does not have an installed internal power supply, you can install one or two power
supplies.
To see which internal power supplies are compatible with your switch, see
Follow the instructions in the following sections to install the appropriate power supply and connect
power to the switch.

Install a 300 W Internal DC Power Supply

Caution
Make sure that the DC power supply circuit is not overloaded. Use proper overcurrent
protection, such as a circuit breaker, to prevent overcurrent conditions. You may use up to a
30-Amp breaker.
To install a 300 W DC power supply (part no. 10933 or 10944) in a switch, perform the following tasks in
the order listed:
1. Make sure you have the tools and materials you need.
See Required Tools and Materials for Installing a 300 W DC Power Supply
on page 130.
on page 258.
Installing Internal Power Supplies
Installing Optional Components
Guide.
Installing Expansion Modules
on page 227.
ExtremeSwitching Hardware Installation Guide
Replaceable Internal
Extreme
on page 294.
Table 47 on page 131 .
Table 47 on page 131.
on page 228.
227