Extremeswitching X690 Series Switches - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

ExtremeSwitching X690 Series Switches

Table 29: X670-G2 Front Panel LEDs
Label or Type
M (Management)
FAN
1, 2, 3, 4, 5
P1, P2
(Power Supply)
Ethernet Port 1-48 or 1-72 Steady green
670-G2-48x-4q QSFP+
ports 40G mode (49, 53,
57, 61)
670-G2-48x-4q QSFP+
ports 10G mode (49-64)
Table 30: X670-G2 2-digit Stack Number Indicator
Label or Type
Left digit (1)
Right digit (1 – 8)
ExtremeSwitching X690 Series Switches
The X690 series switch provides 10 Gb datacenter aggregation with 100 Gb uplinks, ideally suited for
use as a "leaf" switch in conjunction with "spine" switches like the X870 series.
100 ExtremeSwitching Hardware Installation Guide
Color/State
Slow blinking green (1 Hz)
Fast blinking green (2 Hz)
Steady green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Steady amber
Blinking amber
Off
Blinking green
Off
Steady blue
Blinking blue
Steady green
Blinking green
Color/State
Reserved for future use.
Indicates the position of this switch in the SummitStack configuration.
Upper half blinking
Lower half blinking
Lit steadily
ExtremeSwitching Switches
Meaning
Normal operation
Power-on self test (POST) in progress
or
Switch diagnostics are running
POST passed: system is booting image
System is disabled: POST failed or system
overheated
No external power is attached
Normal operation.
Failure.
No power.
Normal operation.
Power is attached, but no power is on.
Power failure.
No power is attached.
Link OK.
Activity on the indicated port.
No link or port disabled.
Link OK
Activity on the indicated port
Link OK
Activity on the indicated port
Meaning
This switch is the stack master node.
This switch is the stack backup node.
This switch is a standby node in the stack.