Mounting A Half-Duplex To Full-Duplex Converter On A Wall; Connecting A Half-Duplex To Full-Duplex Converter To Its Power Adapter - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

Installing Expansion Modules
3. Connect the converter to its power adapter, following the instructions in
to Full-Duplex Converter to its Power Adapter
4. Connect the full-duplex ports (FD1 - FD4) to the switch.
5. Connect the half-duplex ports (HD1 - HD4) to your half-duplex devices.

Mounting a Half-Duplex to Full-Duplex Converter on a Wall

Refer to Installing a Half-Duplex to Full-Duplex Converter
Half-Duplex to Full-Duplex Converter.
To mount a Half-Duplex to Full-Duplex Converter unit on a wall, follow these steps:
1. Drill two holes in the wall, each 4 mm (0.16 in.) in diameter.
The holes should be 10.5 cm (4.13 in.) apart so that they correspond to the locations of the holes in
the bottom of the converter.
2. Insert an anchor bolt (not provided) into each hole in the wall.
3. Place a screw (not provided) into each anchor bolt and tighten so that the screw head protrudes
slightly from the wall.
4. Place the converter onto the screws and gently lower it so that it locks into place.
5. Connect the converter to its power adapter, following the instructions in
to Full-Duplex Converter to its Power Adapter
6. Connect the full-duplex ports (FD1 - FD4) to the switch.
7. Connect the half-duplex ports (HD1 - HD4) to your half-duplex devices.

Connecting a Half-Duplex to Full-Duplex Converter to its Power Adapter

Before connecting the Half-Duplex to Full-Duplex Converter to power, install it using one of the options
described in
The Half-Duplex to Full-Duplex Converter operates on DC power, which it receives from its power
adapter.
Connection points to the power adapter are located on the sides of the converter, as shown in
260.
Installing a Half-Duplex to Full-Duplex Converter
Mounting a Half-Duplex to Full-Duplex Converter on a
on page 321.
on page 320 for installation options for the
on page 321.
on page 320.
ExtremeSwitching Hardware Installation Guide
Wall
Connecting a Half-Duplex
Connecting a Half-Duplex
Figure
321