Power Specifications - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

Power Specifications

Power Specifications
Note
When you use a redundant power supply (RPS), only redundant power – not additive power –
is supported. Thus, the PoE ports load does not increase when an RPS is added.
Table 275: V400 Power Options
V400-24t-10GE2
V400-24p-10GE2
V400-48t-10GE4
V400-48p-10GE4
Table 276: Power Specifications
V400-24t-10GE2
V400-24p-10GE2
V400-48t-10GE4
V400-48p-10GE4
VX-RPS-1000
21
Minimum is defined as idle, with no ports linked. Maximum is defined as fans high, all ports 100% traffic.
448 ExtremeSwitching Hardware Installation Guide
AC Input: 100-240 VAC, 50/60 Hz, 0.6 A max
AC Input: 100-240 VAC, 50/60 Hz, 2.2 A max
DC RPS input: 54 VDC, 18.52 A max
• PoE ports load to 382 W for AC input only.
• PoE ports load to 720 W for DC input only.
• PoE ports load to 720 W for AC+DC input.
AC Input: 100-240 VAC, 50/60 Hz, 1.0 A max
AC Input: 100-240 VAC, 50/60 Hz, 12.0 - 6.0 A max
DC RPS input: 54 VDC, 18.52 A max
• PoE ports load to 740 W for AC input only.
• PoE ports load to 900 W for DC input only.
• PoE ports load to 1440 W for AC+DC input.
Minimum 21 Heat Minimum 21
Dissipation Power
(BTU/hr) Consumption
(Watts)
36.1 10.6
109.8 32.2
66.0 19.3
168.9 49.5
141.3 41.4
Technical Specifications
Maximum 21 Heat Maximum 21
Dissipation Power
(BTU/hr) Consumption
(Watts)
75.2 22.1
336.8 478.7
134.8 39.5
583.2 910.9
3152.8 924