Preparations for network connectivity
VSP 7024XT 10GBase-T connection status
The VSP 7024XT switch includes 24 x 10GBase-T ports as primary client interfaces. Each pair of
10GBase-T ports has two LEDs to indicate connection speed and link activity. These LEDs are at
the top of the RJ-45 connector for the upper port of each pair. The LED on the left is assigned to the
upper port and the LED on the right is assigned to the lower port, as indicated by a triangle graphic
directly above each LED.
The following figure is a cutaway section of a VSP 7024XT switch that shows the 10GBase-T port
LED location.
Figure 26: VSP 7024XT 10GBase-T port status LEDs
A (Left side LED)
B (Right side LED)
The following table describes 10GBase-T port LED status.
OFF
Slow Amber Blink
Solid Green
Green Flashing Off
Solid Amber
Installing Avaya VSP 7000 Series
52
Position
LED state
Comments? infodev@avaya.com
LED assignment
Upper port LED
Lower port LED
Description
No Link
Port Disabled
10GBaseT Link Active
10 Gigabit traffic
1GBaseT Link Active
August 2014