Power Specifications - Avaya 5000 Series Installing

Table 10: Console port pin assignments
Connector

Power specifications

This section describes the AC and DC power specifications for the Ethernet Routing Switch
5600 Series.
AC power cord specifications
The following section outlines the AC power cord specifications for various countries. Ensure
that you use the correct cord for your location.
Table 11: International power cord specifications
Country / Plug Specification
Continental Europe:
• CEE7 standard VII male plug
• Harmonized cord (HAR marking on
the outside of the cord jacket to
comply with the CENELEC
Harmonized Document HD-21)
United States of America / Canada /
Japan:
Installing Avaya Ethernet Routing Switch 5000 Series
Pin number
1 Carrier detect (not used)
2 Transmit Data (TXD)
3 Receive Data (RXD)
4 Data terminal ready (not used)
5 Signal ground (GND)
6 Not used
7 Request to send (not used)
8 Not used
9 Ring indicator (not used)
Specifications
• 220 or 230 VAC
• 50 Hz
• Single Phase
• 100 or 120 VAC
• 50 - 60 Hz
• Single Phase
Power specifications
Signal
Typical Plug
December 2013 77