10Gbase-Zr/Zw Xfp Specifications - Avaya Ethernet Switch 5000 Series Manual

Maximum RIN
Maximum optical return loss tolerance
Receiver characteristics
Average receive power for BER 10
Maximum receive power for damage
Maximum receiver sensitivity in OMA
Maximum receiver reflectance
Stressed receiver sensitivity in OMA
Receive electrical 3 dB upper cutoff
frequency (maximum)
Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown
for safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter
shut down conditions.

10GBASE-ZR/ZW XFP specifications

The following table lists the transmit and receive specifications for the 10GBASE-ZR/ZW XFP.
The reach is up to 80 km at a wavelength of 1550 nm. The part number of this XFP is
AA1403006-E5.
For more information about the 10GBASE-ZX XFP, including test and measurement
information and more specifications, see the IEEE 802.3ae standard.
Caution:
Risk of BER increase
For proper XFP operation, ensure that at least 11 dB of attenuation is present between the
transmit and receive ports.
Table 31: 10GBASE-ZR/ZW XFP specifications
Line rate (nominal)
MTBF
Installing Transceivers and Optical Components on Avaya Ethernet Switch 5000 Series
Parameter
OMA
12
-12
Parameter
10GBASE-ZR/ZW XFP specifications
Specifications
– 128 dB/Hz
– 21 dB
– 15.8 dBm to – 1.0 dBm
4.0 dBm
– 14.1 dBm
– 26 dB
– 11.3 dBm
12.3 GHz
Specifications
10GBASE-ZR 10.3125 Gb/s ±100 ppm (10
GbE)
10GBASE-ZW 9.95328 Gb/s ±20 ppm
(OC-192)
675 000 hours
December 2013 63