10Gbase-Er/Ew Xfp Specifications - Avaya Ethernet Switch 5000 Series Manual

XFP specifications
Receiver electrical 3 dB upper cutoff
frequency
Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown
for safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter
shut down condition

10GBASE-ER/EW XFP specifications

The following table lists the transmitter and receiver specifications for the 10GBASE-ER/EW
XFP. The reach for this XFP is up to 40 km at a wavelength of 1550 nm. The part number of
this XFP is AA1403003-E5.
For more information about the 10GBASE-EX XFP, including test and measurement
information and more specifications, see the IEEE 802.3ae standard.
Table 30: IEEE 802.3ae 10GBASE-ER/EW XFP specifications
Line rate (nominal)
MTBF
Center wavelength range
Distance
Link optical power budget
Transmitter and dispersion power penalty
Transmitter characteristics
Launch power
Minimum side mode suppression ratio
Minimum launch power in OMA minus
transmission and dispersion penalty (TDP)
Minimum optical modulation amplitude
Maximum average launch power of OFF
transmitter
Minimum extinction ratio
62 Installing Transceivers and Optical Components on Avaya Ethernet Switch 5000 Series
Parameter
Parameter
Comments? infodev@avaya.com
Specifications
12.3 GHz
Specifications
10GBASE-ER 10.3125 Gb/s ±100 ppm (10
GbE)
10GBASE-EW 9.95328 Gb/s ±20 ppm
(OC-192)
675 000 hours
1530 to 1565 nm; nominal 1550 nm
Up to 40 km
15 dB
3.0 dB at 40 km
-– 4.7 to 4.0 dBm
30 dB
– 2.1 dBm
– 1.7 dBm
-– 30 dBm
3.0 dB
December 2013