Panel Display; Status Display; Alarm And Warning Display; Hard Wire Base Block Display - YASKAWA Σ-V Series User Manual

2 Panel Display and Operation of Digital Operator

2.1.1 Status Display

2.1

Panel Display

The servo status can be checked on the panel display of the SERVOPACK.
Also, if an alarm or warning occurs, its alarm or warning number is displayed.
2.1.1 Status Display
The display shows the following status.

2.1.2 Alarm and Warning Display

If an alarm or warning occurs, the display will change in the following order.
Example: Alarm A.E60
Status
Display

2.1.3 Hard Wire Base Block Display

If a hard wire base block (HWBB) occurs, the display will change in the following order.
Status
Display

2.1.4 Displays during Overtravel

The display will change as shown below during overtravel.
Forward run prohibited (P-OT signal input ON):
Reverse run prohibited (N-OT signal input ON):
Forward/reverse run prohibited (P-OT/N-OT signal input ON):
2-2
Display
Movement Detection (/TGON)
Lights if linear servomotor speed exceeds the value set in Pn522. (Factory setting: 7 refer-
ence units)
Base Block
Lights for base block.
Reference Input
Lights when a reference is being input.
Command Option Module Communications Status Display
Lights when communications with the Command Option Module are normal.
Unlit
Unlit
Meaning
Unlit Unlit
Unlit Unlit
Unlit
Unlit
Status
Display
Status
Display
Status
Display
Unlit