Ae5A Servopack - YASKAWA Σ-V Series User Manual

1 Outline
1.5.2 Connecting to SGDV-
1.5.2 Connecting to SGDV-
(1) Using a Three-phase, 200-V Power Supply
Power supply
Three-phase 200 VAC
R S T
Molded-case
circuit breaker
(MCCB)
Protects the power
supply line by shutting
the circuit OFF when
overcurrent is detected.
Noise filter
Used to eliminate
external noise from
the power line
Magnetic contactor
Turns the servo ON
and OFF.
Install a surge
absorber.
Regenerative
resistor*
Main circuit cable
for linear servomotor
∗ Before connecting an external regenerative resistor to the SERVOPACK, refer to 3.7 Regenerative Resistors Connec-
tions.
1-16

AE5A SERVOPACK

AE5A SERVOPACK

SGDV-
SERVOPACK
Cable for connecting
serial converter unit
Cable for connecting
linear scale
Linear scale
(not included)
AE5A
Command Option
Module
Cable for connecting
digital operator
Cable for connecting
personal computer
I/O signal cable
Serial converter unit
Digital
operator
Personal
computer
External device
such as external
LED indicator
When not using the safety function,
use the SERVOPACK with the safety
function jumper connector
(JZSP-CVH05-E provided as an
accessory) inserted.
When using the safety function,
insert a connection cable specially
for the safety function.
Safety function
devices
Cable for connecting
hall sensor
Linear servomotor
with core