4.3.3 Digital Operator Display during Testing without Motor
The mark (∗) is displayed before status display to indicate the test without motor operation is in progress.
∗ B B
U n 0 0 0 =
0
0 0 0 0 0
U n 0 0 2 =
0
0 0 0 0 0
U n 0 0 8 =
0
0 0 0 0 0 0 0 0 0 0
U n 0 0 D =
0
0 0 0 0 0 0 0 0 0 0
(Example: Test without motor in progress)
Display
*RUN
*BB
*
P DET
*PT NT
*P-OT
*N-OT
*HBB
Note: The test without motor status is not displayed during alarm occurs (A.
− P R M / M O N −
Power is supplied to the motor.
Power to the motor is OFF.
Detecting the polarity.
Forward or reverse run is prohibited.
Running in the forward direction is prohibited.
Running in the reverse direction is prohibited.
In hard-wire base block (safety) state.
Status
).
4.3 Test Without Motor Function
4
4-29