Examples Of Servo System Configurations; Connecting To Sgdv- Fe5A Servopack - YASKAWA Σ-V Series User Manual

1.5

Examples of Servo System Configurations

This section describes examples of basic servo system configuration.
1.5.1 Connecting to SGDV-
Power supply
Single-phase 100 VAC
R T
Molded-case
circuit breaker
(MCCB)
Protects the power
supply line by shutting
the circuit OFF when
overcurrent is detected.
Noise filter
Used to eliminate
external noise from
the power line
Magnetic
contactor
Turns the servo ON
and OFF.
Install a surge
absorber.
Regenerative
resistor *
Main circuit cable
for linear servomotor
∗
Before connecting an external regenerative resistor to the SERVOPACK, refer to 3.7 Regenerative Resistors Connec-
tions.
FE5A SERVOPACK
SGDV- FE5A
SERVOPACK
Command Option
Module
Cable for connecating
digital operator
Cable for connecting
personal computer
I/O signal cable
Cable for connecting
serial converter unit
Serial converter unit
Cable for connecting
linear scale
Linear scale
(not included)

1.5 Examples of Servo System Configurations

Digital
operator
Personal
computer
External device such as
external LED indicator
When not using the safety function,
use the SERVOPACK with the
safety function jumper connector
(JZSP-CVH05-E provided as an
an accessory) inserted.
When using the safety function,
insert a connection cable
specially for the safety function.
Safety function
devices
Cable for connecting
hall sensor
Linear servomotor
with core
1
1-15