Setting A Data Report - Furuno FELCOM 15 Operator's Manual

5. DATA REPORTING AND POLLING
5.1.1

Setting a data report

1. Press the function key [F5] to display the Position Reports menu.
2. Press the [Enter] or [1] key to display Data Report menu.
3. Press [1], [2], [3] or [4] to set addressee as appropriate.
4. Press the [Enter] key to open the options window.
5. Choose "ON" or "OFF" as appropriate.
ON:
OFF: Data report off
6. Press the [Enter] key to close the options window.
7. Press the [↓] key to choose Report Length.
8. Press the [Enter] key to open the options window.
9. Choose "1" or "2".
1:
2:
3:
10. Press the [Enter] key to close the options window.
11. Press the [↓] key to choose Destination.
12. Press the [Enter] key to display the DNID list.
13. Choose DNID. (LES ID and Member ID are automatically selected with
DNID.)
14. Press the [Enter] key to close the DNID list.
15. Press the [↓] key to choose Activation.
16. Press the [Enter] key to open the options window.
17. Choose "Regular Interval" or "Daily" as appropriate.
18. Press the [Enter] key to close the options window.
5-2
Position reports menu
Position Reports
Data Report
1. Data Report
2. Message Reports
Data Report Programming
3. Data Network ID
Status OFF
Report Length 2
Destination
DNID
LES ID
Member No.
Activation Regular Interval
Interval Time 00:10
Report Times
Start Time1 - - : - -
- - : - -
Start Time2
- - : - -
Start Time3
Start Time4 - - : - -
Data report on
Position
Position, speed, bearing, depth
Spare (not used)
Position Reports
1. Data Report
2. Message Report
3. Data Network ID
Daily is selected
1 (- - - : No Limit)
Data report menu
Regular Interval/Daily
Start Time1 - - : - -
Start Time2 - - : - -
Start Time3 - - : - -
Start Time4 - - : - -