Editor Menu Setup - Furuno FELCOM 15 Operator's Manual

3.1.3

Editor menu setup

The Editor menu sets the parameters of the text editor.
1. Press the function key [F8] to display the Setup menu.
2. Press the [3] key to display the Editor Setup menu.
3. The illustration above shows the default editor setup settings. To change
settings:
e) Choose item with arrow keys.
f) Press the [Enter] key to open corresponding options window.
g) Choose setting with the arrow keys.
h) Press the [Enter] key to register setting.
i) Press the [Esc] key twice to return to the standby display.
Text Mode:
Edit Mode:
Word Wrap:
Line No.:
Tab Width:
Column Width:
Cursor Type:
Scroll:
File Edit Transmit EGC
Setup
Editor Setup
Text Mode Ascii
2. System Setup
3. Editor Setup Edit Mode Insert
Word Wrap ON
4. Terminal Setup
5. EGC Setup Line No. ON
6. Auto Mode Setup Tab Width 4 Char
Column Width 69
7. E-Mail Setup
8. Directories Cursor Type Block
Scroll Full Screen
9. Configuration
Current State: IDLE
DCE Ver **
Choose "Telex" or "ASCII".
Choose "Insert" (insert character at cursor location) or
"Overwrite" (write over character at cursor location).
Turns on/off hyphenation at the end of a line.
Turns line number display on or off.
Sets horizontal tab width; 2, 4 or 8 tabs per line.
Choose Telex (69 Fixed) or ASCII (40 to 80).
Chooses cursor configuration, "
Sets how much the screen moves up over the page (Full
Screen or Half Screen) when [PgUp] or [PgDn] key is
operated.
Reports Logs Options
SYNC ( NCS )
NCS: POR LOGOUT
Editor setup menu
3. FILE OPERATIONS
Setup Position StopAlarm
02-02-25 09:04 (UTC)
LAT: 35:00.00N
LON:135:00.00E
■
" or underline.
3-3