System Setup - Furuno FELCOM 15 Operator's Manual

2. SYSTEM INITIALIZATION
2.1.2

System setup

The System Setup menu provides for input of date, time, operating mode, and
port function.
1. Press the function key [F8] to choose the Setup menu.
2. Press the [2] key to display the System Setup menu.
Note: If the terminal unit is off, or its interconnection cable has loosened or is
3. System Date & Time is selected; press the [Enter] key to open the date entry
window.
4. Enter the date with the numeric keys. (Time is fed from a navigator.)
5. Press the [Enter] key to close the window.
6. Press the [↓] key to choose the Preferred NCS.
2-2
File Edit Transmit EGC
Setup
1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Network Setup
9. Directories
A. Configuration
B. Save to FD
C. Load from FD
D. Command Window
damaged, the message "No response from terminal unit." appears.
Setup
System Date & Time
IMN
Preferred NCS
MES Operation Mode
Nav Port
Active Port
Message Output Port
9. Configuration
EGC Output Port
Setup
System Date & Time
IMN
Preferred NCS
MES Operation Mode
Nav Port
Active Port
Message Output Port
9. Configuration
EGC Output Port
System setup menu, date entry window
Reports Logs Options
Setup menu
System Setup
01:53 02-02-25 (YY-MM-DD)
IOR
INMARSAT-C
OFF
INT
INT
INT
System setup menu
System Setup
01:53 97-08-04 (YY-DD) 01:53 02-02-25
IOR
INMARSAT-C
OFF
ALL
INT
INT
Setup Position StopAlarm