Furuno FELCOM 15 Operator's Manual page 112

19. Do one of the following depending on the selection you made at step 17.
• "Regular Interval" selected at step 17:
(1) Press the [↓] key to choose Interval Time.
(2) Press the [Enter] key to open the window for interval time entry.
(2) Key in the interval time.
(3) Press the [Enter] key to close the window.
(4) Press the [↓] key to choose Report Times.
(5) Press the [Enter] key to open the window for report times entry.
(6) Key in the Report times or choose "No limit".
(7) Press the [Enter] key to close the window.
• "Daily" selected at step 17:
(1) Press the [↓] key to choose Start Time 1.
(2) Press the [Enter] key to open at the window for start time entry.
(3) Key in the start time.
(4) Press the [Enter] key to close the window.
(5) If necessary, key in the start time of Start Times 2-4.
20. Press the [Esc] key to show the Entry window.
21. Yes is selected; press the [Enter] key to close the Data Report window.
Position Reports
Data Report
1. Data Report
2. Message Reports
Data Report Programming
3. Data Network ID
Status OFF
2
Report Length
Destination
DNID
LES ID
Member No.
Regular Interval
Activation
Interval Time 01:00
Report Times 24 (- - - : No Limit)
Start Time1 - - : - -
- - : - -
Start Time2
Start Time3 - - : - -
Yes
Start Time4 - - : - -
Data report menu
5. DATA REPORTING AND POLLING
Entry
No
5-3