Furuno FELCOM 15 Operator's Manual page 114

22. Press the [Enter] key to close the options window.
23. Do one of the following depending on the selection you made at step 21.
•
"Regular Interval" selected at step 21:
(1) Press the [↓] to choose Interval Time.
(2) Press the [Enter] key to open the window for interval time entry.
(2) Key in the interval time.
(3) Press the [Enter] key to close the window.
(4) Press the [↓] key to choose Report Times.
(5) Press the [Enter] key to open the window for report times entry.
(6) Key in the report times or choose "No Limit".
(7) Press the [Enter] key to close the window.
• "Daily" is selected at step 21:
(1) Press the [↓] to choose Start Time 1.
(2) Press the [Enter] key to open the window for start time entry.
(3) Key in the start time.
(4) Press the [Enter] key to close the window.
(5) If necessary, key in the start time of Start Times 2-4.
24. Press the [↓] key.
25. Press the [Enter] key to open the options window.
26. Press the [↑] or [↓] key to choose the contents of message report.
NAV:
NAV+SEAINF: Position, speed, bearing, water temperature, current, depth
NAV (R):
FILE:
27. Press the [Esc] key to show the Entry window.
PIN Code
Message Report Programming
Status
Station Name
LES ID
Activation
Report Contents
File
28. Yes is selected; press the [Enter] key to finish.
Position, speed, bearing
Position, speed, course
Choose a file. (When chosen "FILE" is activated. Choose file
with cursor and press the [Enter] key.)
Message Report
12345678
ON
FRNINMBTSTSES
Destination Type TELEX
Country/Ocean Code 583
343199710
Station ID
Modem Type
Subject
303 (YAMAGUCHI)
Daily
Interval Time 01:00
Report Times 24 (- - - : No Limit)
08:00
Start Time1
- - : - -
Start Time2
Start Time3 - - : - -
Start Time4 - - : - -
NAV+SEA INF
Message Report screen
5. DATA REPORTING AND POLLING
Entry
Yes No
5-5