Entering Own Ship's Position - Furuno FELCOM 15 Operator's Manual

2. SYSTEM INITIALIZATION
2.8

Entering Own Ship's Position

When there is no position data, set Nav Port in the System Setup menu to
"OFF," as explained in paragraph 2.1.2, and then enter ship's position manually
as follows:
1. Press the function key [F9] to display the Position menu.
2. Press the [Enter] key to open the window for latitude entry.
3. Enter latitude and [N] or [S].
4. Press the [Enter] key to close the window.
5. Press the [↓] key to choose LON.
6. Press the [Enter] key to open the window for longitude entry.
7. Enter longitude and [E] or [W].
8. Press the [Enter] key to close the window.
9. Press the [Esc] key to open the update window.
10. Yes is selected; press the [Enter] key to update position and close the Ship
Position menu. This position data is also entered on the "Update Distress
Alert" screen. (Refer to page 6-1.)
2-26
File Edit Transmit EGC
Ship Position
00:00.00N
LAT
000:00.00E
LON
File Edit Transmit EGC
Ship Position
00:00.00N
LAT
LON 000:00.00E
Update
No
Yes
Ship position, update
Reports Logs Options
Ship position
Ship Position
LAT 00:00.00N
00:00.00N
LON 000:00.00E
Ship position
Ship Position
LAT 00:00.00N
000:00.00E
000:00.00E
LON
Ship position
Reports Logs Options Setup
Setup Position StopAlarm
Position StopAlarm