Automatic Mode Setup - Furuno FELCOM 15 Operator's Manual

2.13

Automatic Mode Setup

The Auto Mode Setup menu mainly lets you choose which EGC messages to
save and print automatically. You may also disable or enable the routine
message receive alarm from this menu.
1. Press the function key [F8] to show the Setup menu.
2. Press the [6] key to choose Auto Mode Setup.
3. Choose the item to process and then press the [Enter] key.
4. Choose ON or OFF as appropriate and then press the [Enter] key.
5. Press the [Esc] key to show the Update window.
6. Yes is selected; press the [Enter] key to update data.
Auto Mode Setup
Auto Log Print
Receive Alarm
Auto Receive Message Save
Auto Receive Message Print
Auto EGC Message Save
System
FleetNET
SafetyNET (routine)
SafetyNET (safety)
SafetyNET (Urgent & disstress) ON
Auto EGC Message Print
System
FleetNET
SafetyNET (routine)
SafetyNET (safety)
Auto mode setup menu
2. SYSTEM INITIALIZATION
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
2-33