Silencing The Audio Alarm - Furuno FELCOM 15 Operator's Manual

1.7

Silencing the Audio Alarm

Some error messages and alerts are accompanied by the audio alarm. This
alarm can be silenced, in most instances, by pressing any key. If the alarm
cannot be silenced in that manner, go to the Setup menu (see the paragraph
below) to silence it. Note that the distress alert alarm transmitted by own ship
cannot be silenced by either method; it automatically stops when you receive the
distress acknowledge signal from LES.
1. Press the function key [F8] to display the Setup menu.
2. Press the [6] key to display the Auto Mode Setup menu.
3. Press the [↓] key to choose Receive Alarm.
4. Press the [Enter] key to open the options window.
File Edit Transmit EGC
Setup
1. Distress Alert Setup
2. System Setup
3. Editor Setup
4. Terminal Setup
5. EGC Setup
6. Auto Mode Setup
7. E-Mail Setup
8. Network Setup
9. Directories
A. Configuration
B. Save to FD
C. Load from FD
D. Command Window
Current State: IDLE
DCE Ver **
Auto Log Print
Receive Alarm
Auto Receive Message Save
Auto Receive Message Print
Auto EGC Message Save
System
FleetNET
SafetyNET (routine)
SafetyNET (safety)
SafetyNET (Urgent & distress) ON
Auto EGC Message Print
System
FleetNET
SafetyNET (routine)
SafetyNET (safety)
Auto mode setup menu
1. OPERATIONAL OVERVIEW
Reports Logs Options Setup
SYNC ( NCS )
NCS: IOR LOGOUT
Setup menu
Auto Mode Setup
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Position StopAlarm
02-02-25 01:42 (UTC)
1-11