Setting A Message Report - Furuno FELCOM 15 Operator's Manual

5. DATA REPORTING AND POLLING
5.1.2

Setting a message report

1. Press the function key [F5] to display the Position Reports menu.
2. Press the [2] key to display the Message Report menu.
3. Press [1], [2], [3] or [4] to set addressee as appropriate. You can set four
addressees.
4. Press the [Enter] key to open the window for PIN code entry.
5. Key in a PIN code. A PIN code is necessary in message polling, to prepare a
message report.
6. Press the [Enter] key to close the window.
7. Press the [↓] key to choose Status.
8. Press the [Enter] key to open the options window.
9. Choose "ON" or "OFF" as appropriate.
ON:
OFF: Message report off
10. Press the [Enter] key to close the options window.
11. Press the [↓] key to choose Station Name.
12. Press the [Enter] key to display the station list.
13. Choose a station.
14. Press the [Enter] key to close the station list.
15. Press the [↓] key to choose LES ID.
16. Press the [Enter] key to display the LES list.
17. Choose LES.
18. Press the [Enter] key to close the LES list.
19. Press the [↓] key to choose Activation.
20. Press the [Enter] key to open the options window.
21. Choose "Regular Interval" or "Daily" as appropriate.
5-4
Position reports menu
PIN Code
Message Report Programming
Status
Station Name
Destination Type
Country/Ocean Code
Station ID
Modem Type
Subject
LES ID
Activation
Interval Time
Report Times
Start Time1
Start Time2
Start Time3
Start Time4
Report Contents
File
Message report menu
Message report on
Position Reports
1. Data Report
2. Message Report
3. Data Network ID
Message Report
OFF
TELEX
Regular Interval
00:10
1 (- - - : No Limit)
- - : - -
- - : - -
- - : - -
- - : - -
NAV+SEA INF