Inserting The Destinations Of A Fax Terminal - Furuno FELCOM 15 Operator's Manual

4.1.8

Inserting the destinations of a fax terminal

You can send a text message to a Group 3 type fax terminal which is connected
to the international PSTN (telephone) land line, provided the LES selected
supports fax delivery.
1. Prepare message. (To send stored file, close any open files.)
2. Press the function key [F3] to display the Transmit menu.
3. Press the [1] key to choose Transmit Message..
4. Press the [↓] key to choose Message File.
5. The message file line displays "Message now begin edited." when a file is the
currently displayed. To send a file stored on a floppy disk, choose the file
from the file list.
6. Press the [↓] key to choose Destination Type.
7. Press the [Enter] key to open the options window.
8. Choose "FAX".
9. Press the [Enter] to close the options window.
10. Press the [↓] to choose Country/Ocean Code.
11. Press the [Enter] key to open the window for country/ocean code entry.
12. Key in international telephone code of recipient. A list of international
telex/telephone country codes appears in the Appendix.
13. Press the [Enter] key to close the window.
14. Press the [↓] key to choose Station ID.
15. Press the [Enter] key to open the window for station ID entry.
16. Enter facsimile number.
17. Press the [Enter] key to close the window.
18. Press the [↓] key to choose Modem Type.
19. Press the [Enter] key to display the list of modem types.
20. Press the [Enter] key to choose "T30". (Other modem types are not
supported.)
21. Press the [↓] key to choose LES ID.
22. Press the [Enter] key to open the LES Table.
23. Choose LES ID.
Note: If the LES ID entered is invalid, "Cannot use this LES. Please check
24. Press the [Enter] key to close the LES Table.
25. Press the [↓] key twice to choose TRANSMIT.
26. Press the [Enter] key twice to send the message to the message buffer. (To
escape, choose No and press the [Enter] key.) The message "Message is
entered in sending Buffer." appears.
27. Press any key to return to the standby display.
The message(s) will be transmitted according to the Send Delay setting.
"Current State: SENDING" appears at the bottom of the screen during
transmission.
When the message is transmitted successfully, "Successful Sending message"
appears and the message's particulars are sent to the Display Log.
network configuration." appears.
4. INMARSAT C COMMUNICATIONS
4-19