2. SYSTEM INITIALIZATION
2.14 Saving, Loading System Settings
You can save system settings to a floppy disk and load them into the terminal
unit. This is useful for having a backup copy of system settings.
2.14.1
Saving system settings to a floppy disk
1. Insert a formatted floppy disk in the disk drive. (For how to format a floppy
disk, see paragraph 3.2.1.)
2. Press the [F8] key to show the Setup menu.
3. Press the [B] key (Save to FD).
4. Press the [Enter] key to save system settings to the floppy disk.
2.14.2
Loading system settings to the terminal unit
1. Insert the floppy disk containing the system settings you wish to load.
2. Press the [F8] key to show the Setup menu.
3. Press the [C] key (Load from FD).
4. Press the [Enter] key to load system settings to the terminal unit.
2-34