Displaying Egc Closed Network Id (Enid) - Furuno FELCOM 15 Operator's Manual

4.4.2

Displaying EGC closed network ID (ENID)

To join a FleetNET
provider. The information provider adds the MES to the group which is to receive
the service, by downloading a Group Call ID (via an LES which supports
FleetNET
ID and can accept broadcasts from the information provider. The MES operator
cannot change this stored EGC closed network IDs (ENIDs). Up to 64 ENIDs are
stored on a non-volatile memory.
The ENID stored can be accessed for downloading and deleting via the satellite
path. It is possible for an MES operator to inhibit (or activate as required), via the
terminal unit, selected ENIDs previously downloaded.
Along with the ENID, the name of the information provider is stored. In the event
that a download command is received and the ENID storage area is full, an
ENID which has been inhibited (de-activated) by the MES operator will be written
over. If none has been inhibited, then the new download is not accepted.
Follow the procedure below to inhibit (or activate) an ENID.
1. Press the function key [F4] to display EGC menu.
2. Press the [2] key to display the EGC Network ID List.
3. Choose an ENID you want inhibit (or activate).
4. Press the Space bar to inhibit (or [Enter] key to reactivate).
5. Press the [Esc] key to return to the standby display.
TM
service, an MES must be registered with an information
TM
broadcasts), uniquely addressed to the MES. The MES stores the
File Edit Transmit EGC
EGC
1. Display EGC Message EGC Network ID List
2. EGC Network ID
ENT: Activate SPACE: Inhibit Ctrl+P: Print ESC: Quit
Mark '*' means activation
01 * 00001 202 FURUNO
02 * 00002 202 FURUNO
03 * 04001 202 FURUNO
04 * 04002 202 FURUNO
05 * 04003 202 FURUNO
06 * 04005 202 FURUNO
07
* 04006 202 FURUNO
08 * 04007 202 FURUNO
Current State: IDLE
DCE Ver **
4. INMARSAT C COMMUNICATIONS
Reports Logs Options
SYNC ( NCS )
NCS: IOR LOGIN
EGC network ID list
Setup Position StopAlarm
02-02-25 12:00 (UTC)
LAT: 34:43.00N
LON: 135:21.00E
4-29