Omron LD-105CT User Manual page 66

4.1 Settings and Configuration
Security Settings
Encryption:
Disabled
l
WEP 64-bit
l
WEP 128-bit
l
TKIP/RC4
l
CCMP/AES
l
TKIP/CCMP/AES
l
Authentication:
OPEN
l
WPA-PSK
l
WPA2-PSK
l
WEP
WEP Key Number (Key 1 - Key 4)
l
WEP Keys
l
WPA/WPA2-PSK
PSK
l
PSK-Type (Passphrase or Raw Hex)
l
Click Apply for your changes to take effect.
Wireless Coverage
The AMR must have wireless coverage for multi-AMR installations, or in areas where you
wish to send new commands to or receive status updates from the AMR.
Ensure that, in such cases, you have adequate wireless coverage. Because of the variation pos-
sible in different environments, we don't specify what components or techniques should be
used to obtain this coverage.
We suggest that you conduct a comprehensive site survey to ensure adequate wireless cov-
erage. You can test the coverage of your wireless setup by trying to ping it from various loc-
ations.
>= -40 dBm is the ideal WiFi signal strength, -60 dBm is the recommended minimum.
Bandwidth Considerations
The typical bandwidth in a fleet will average about 50 Kbps/AMR. This would increase if the
AMR is connected to the Enterprise Manager, and is actively viewed by MobilePlanner. This
number can increase or decrease depending on the types of commands and debugging tools
that are enabled in MobilePlanner. In any case, the bandwidth is not likely to exceed 500 Kbps
per AMR (0.5 Mbps).
66 LD Cart Transporter User's Manual 14766-000 Rev H