Omron LD-105CT User Manual page 157

Retain the M6 screws for reassembly. These are flat head, stainless screws.
3. Disconnect the cables going to the latching assembly and sensors in the Latching Mech-
anism.
4. Carefully lift off the top plate.
As you remove the top plate:
At this point, you will have access to the payload bay.
14766-000 Rev H
CAUTION: PROPERTY DAMAGE RISK
!
Take care not to scratch the laser lens when removing the top plate.
LD Cart Transporter User's Manual
Chapter 10: Maintenance
157