Local Authorization - Kyocera 508ci Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Local Authorization

Select whether or not to use Local Authorization.
NOTE
When using Local Authorization, the user authentication type must be set to [Local Authentication].
Enabling User Login Administration (page 9-3)
1
2
2
2
Set the User Login Administration.
[Use Specific Login User Name]: This option can be used to specify a user name and
password to use the same User login for every FAX job. If this option is selected, the user
does not have to type the name and password for each FAX job.
[Prompt for Login User Name]: A screen for entering the user name and password will be
displayed when attempting a transmission. The user name and password must be entered
each time a transmission is attempted.
3
Click [OK].
Display the screen.
1
[System Menu/Counter] key > [Job Accounting/Authentication]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name
358ci
408ci
508ci
2
Select "User Login Setting" [Local Authorization].
Configure the settings.
Select [Off] or [On].
1
Login User Name
3500
4000
5000
9-17
Login Password
3500
4000
5000