Kyocera 508ci Operation Manual page 446

Setup and Registration (System Menu) > System Menu
Wireless Network
Configure settings for the optional Wireless Network Interface Kit.
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-51) is installed.
Item
Connection Status
Setup Available Network
Push Button Method
PIN Code Method
(Device)
PIN Code Method
(Terminal)
You can check the wireless LAN status.
Select access points to which the machine can be connected, enter the
Preshared Key and start a connection.
If the access point supports the push button method, wireless settings
can be configured using the push button. This setting executes push
button, and the connection is started by pressing the push button on the
access point.
NOTE
The push button method supports only the WPS.
Starts connection using the machine's PIN code. Enter the PIN code into
the access point. The PIN code of the machine is automatically
generated.
Starts connection using the PIN code of the access point. Enter the PIN
code of the access point.
8-63
Description