Security Settings - Kyocera 508ci Operation Manual

Setup and Registration (System Menu) > System Menu
Item
NFC
Remote Operation
Others
[System Menu/Counter] key > [Network Settings] > "Others"
Item
Primary Network
(Client)
Restart Entire Device

Security Settings

Configures security settings.
Interface Block Setting
[System Menu/Counter] key > [Security Settings] > "Interface Block Setting"
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
Item
USB Host
USB Device
Use NFC (Near Field Communication).
Value: Off, On
Configure settings for remote operation.
Value: Off, On
When you set it to [On], set the Use Restriction.
Value: Off, Use Password, Administrator Only
When selecting [Off], users without administrator privileges can also execute
remote operation.
When selecting [Use Password], enter the password, then re-enter it to
confirm.
When selecting [Administrator Only], only administrator can execute remote
operation.
NOTE
When selecting [Administrator Only], the remote operation using VNC
software is unavailable.
Select the network interface to be used for the send function that this machine functions as
a client, the network authentication and connecting to external address book.
Value: Wi-Fi, Wired Network, Optional Network
• [Optional Network] is displayed when the optional Network Interface Kit (IB-50) or
Wireless Network Interface Kit (IB-51) is installed.
• You can set and use "[Wired Network] or [Wi-Fi]", and "[Optional Network] (IB-50 or
IB-51)" individually for the e-mail send connection.
Restart the machine without turning the power switch off. Use this to deal with any unstable
operation by the machine. (Same as the computer restart.)
This locks and protects the USB port (USB host).
Value: Unblock, Block
This locks and protects the USB interface connector (USB Device).
Value: Unblock, Block
Description
Description
Description
8-66