Kyocera 508ci Operation Manual page 450

Setup and Registration (System Menu) > System Menu
Item
USB Drive
Optional Interface 1
Optional Interface 2
Restart Entire Device
Device Security Settings
[System Menu/Counter] key > [Security Settings] > "Device Security Settings"
Item
*1
Unusable Time
Display Status/Log
Security Level
Remote Printing
Software Verification
*1 Displayed only when the optional FAX Kit is installed.
This locks and protects the USB memory slot.
Value: Unblock, Block
NOTE
This function is available when USB Host is set to [Unblock].
This locks and protects the optional interface slots.
Value: Unblock, Block
NOTE
You can set this feature for each slot.
Restart the machine without turning the power switch off.
IMPORTANT
After changing "Interface Block Setting", restart the network or turn the machine OFF
and then ON.
Set a time period during which the machine will not print received faxes.
FAX Operation Guide
Display Status/Log (page 8-48)
Specify the security level.
Value
Low: This mode is used during maintenance. Do not use normally.
High: This is the security setting we recommend. Use this setting normally.
Very High: In addition to [High] setting, this setting disables the machine settings to be
changed from external command.
NOTE
This function is available when you have logged in as machine administrator.
Adding a User (Local User List) (page 9-7)
Remote Printing (page 8-46)
Verify the installed software.
Select [Start] to start verification.
If an error occurs during software verification, contact your dealer or service representative.
Description
Description
8-67