Kyocera 508ci Operation Manual page 334

Using Various Functions > Functions
Two-sided to Two-sided
Original
NOTE
The paper sizes supported in Duplex mode are A4, B5, A5, Folio, Legal, Letter, Statement, Oficio II, Executive,
216 × 340 mm, and 16K.
Copying
Prints 1-sided or open book originals to 2-sided, or 2-sided or open book originals to 1-sided. Select the binding
orientation for original and finished documents.
Item
1-sided>>1-sided
1-sided>>2-sided Finishing
Original
Orientation
2-sided>>1-sided Original
Original
Orientation
2-sided>>2-sided Original
Finishing
Original
Orientation
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
When placing the original on the platen, consecutively replace each original and press the [Start] key.
After scanning all originals, select [Finish Scan] to start copying.
Printing
Print a document to 1-sided or 2-sided sheets.
Produces two-sided copies from two-sided originals. Place originals in
the document processor.
Copy
Value
―
Left/Right, Top
Top Edge on Top,
Top Edge on Left,
*1
Auto
Left/Right, Top
Top Edge on Top,
Top Edge on Left,
*1
Auto
Left/Right, Top
Left/Right, Top
Top Edge on Top,
Top Edge on Left,
*1
Auto
Disables the function.
Select the binding orientation of copies.
Select the orientation of the original document top
edge to scan correct direction. Select [Original
Orientation] to choose orientation of the
originals, either [Top Edge on Top] or [Top Edge
on Left].
Select the binding orientation of originals.
Select the orientation of the original document top
edge to scan correct direction. Select [Original
Orientation] to choose orientation of the
originals, either [Top Edge on Top] or [Top Edge
on Left].
Select the binding direction of originals.
Select the binding orientation of copies.
Select the orientation of the original document top
edge to scan correct direction. Select [Original
Orientation] to choose orientation of the
originals, either [Top Edge on Top] or [Top Edge
on Left].
6-51
Description