Kyocera 508ci Operation Manual page 445

Setup and Registration (System Menu) > System Menu
IP Filter (IPv6)
[System Menu/Counter] key > [Network Settings] > "Network Settings" [IP Filter (IPv6)]
Item
IP Filter (IPv6)
IPSec
[System Menu/Counter] key > [Network Settings] > "Network Settings" [IPSec]
Item
IPSec
Restart Network
[System Menu/Counter] key > [Network Settings] > "Network Settings" [Restart Network]
Item
Restart Network
Optional Network
[System Menu/Counter] key > [Network Settings] > "Optional Network"
Configure settings for the optional Network Interface Kit.
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Host Name
Item
Host Name
Configure IP filters. IP filters restrict access to the machine based on the IP addresses and
protocols.
Specify the IP addresses or network addresses of the hosts to which access is granted from
Command Center RX. If nothing is specified on this page, access from all hosts is allowed.
Value: Off, On
Command Center RX User Guide
Select whether to use IPSec.
Value: Off, On
Restarts the network.
Check the host name of the machine. Host name can be changed from Command
Center RX.
Changing Device Information (page 2-67)
Description
Description
Description
Description
8-62