Enabling User Login Administration - Kyocera 508ci Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration

Enabling User Login Administration

This enables user login administration. Select one of the following authentication methods:
Item
Local Authentication
Network
Authentication
1
2
User authentication based on user properties on the local user list stored in the machine.
User authentication based on Authentication Server. Use a user property stored in
Authentication Server to access the network authentication login page.
Display the screen.
1
[System Menu/Counter] key > [Job Accounting/Authentication]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name
358ci
408ci
508ci
2
Select "User Login Setting" [User Login].
Configure the settings.
Select [Local Authentication] or [Network Authentication].
Select [Off] to disable user login administration.
If you select [Local Authentication], set [Local Authorization].
Local Authorization (page 9-17)
If you select [Network Authentication], set [Server Settings].
Server Settings (page 9-18)
NOTE
If you cannot login because of the setting of the machine, login with any administrator
registered in the local user list and correct the settings.
Descriptions
Login User Name
3500
4000
5000
9-3
Login Password
3500
4000
5000