Kyocera 508ci Operation Manual page 444

Setup and Registration (System Menu) > System Menu
IMPORTANT
Depending on the protocol, there are models where you need to restart the network or turn the machine OFF
and then ON after changing the setting.
Ping
[System Menu/Counter] key > [Network Settings] > "Network Settings" [Ping]
Item
Ping
Ping Timeout
Bonjour
[System Menu/Counter] key > [Network Settings] > "Network Settings" [Bonjour]
Item
Bonjour Protocol
Settings
Available
Network
IP Filter (IPv4)
[System Menu/Counter] key > [Network Settings] > "Network Settings" [IP Filter (IPv4)]
Item
IP Filter (IPv4)
Checks if communication with the destination by entering the host name or IP address of the
destination is possible.
NOTE
If [Primary Network (Client)] is set to [Others], this item is not displayed.
Primary Network (Client) (page 8-66)
Ping Timeout (page 8-10)
Select whether to use Bonjour.
Value: Off, On
Set whether to enable this function for each network of Wi-Fi Direct, Wi-Fi and
wired.
Value: Disable, Enable
Configure IP filters. IP filters restrict access to the machine based on the IP addresses and
protocols.
Specify the IP addresses or network addresses of the hosts to which access is granted from
Command Center RX. If nothing is specified on this page, access from all hosts is allowed.
Value: Off, On
Command Center RX User Guide
Description
Description
Description
8-61