Kyocera 508ci Operation Manual page 563

Troubleshooting > Troubleshooting
S
Message
Scanner memory is
*1
full.
*1
Send Error.
Shake the toner
container.
SSD error.
Staple is empty.
Checkpoints
—
—
—
—
*1
Has the staple cartridge holder
run out of staples?
Corrective Actions
Scanning cannot be performed
due to insufficient memory of the
scanner. Follow the instructions
on the screen.
An error has occurred during
transmission. The job is
canceled. Select [End]. Refer to
Responding to Send Error for
the error code and corrective
actions.
Open the main unit front cover
and remove the toner container.
Shake carefully and replace.
An error has occurred on the
SSD. Job is canceled. Select
[End].
The error cords are as follows.
01: The amount of data that can
be saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, divide the file
into smaller files. If the error
occurs after the file is divided,
the SSD is damaged. Execute
[System Initialization].
04: Insufficient space on the
SSD to complete this operation.
Move data or delete unneeded
data.
NOTE
Please be aware that when you
carry out initialization of the
system, the data saved in SSD
will be erased.
If the staples are depleted, the
machine will stop and the
location of staple depletion will
be indicated on the screen.
Leave the machine on and
follow the instructions to replace
the staple case. Select
[Continue] to print without
stapling. Select [Cancel] to
cancel the job.
10-44
Reference
Page
—
page 10-48
page 10-4
—
page 10-14
page 10-15
page 10-17