Kyocera 508ci Operation Manual page 494

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Additional Authentication
Select whether or not to require password entry after authenticating by ID card.
NOTE
This function does not appear when the server type is set to [NTLM] or [Kerberos] in "Network Authentication".
1
2
Display the screen.
1
[System Menu/Counter] key > [Job Accounting/Authentication]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name
358ci
408ci
508ci
2
Select "ID Card Settings" [Additional Authentication].
Configure the settings.
Select [Off], [Use Password] or [Use PIN Code].
NOTE
[Use PIN Code] is displayed only when using PIN Code Authorization.
PIN Login (page 9-32)
Login User Name
3500
4000
5000
9-31
Login Password
3500
4000
5000