Kyocera 508ci Operation Manual page 454

Setup and Registration (System Menu) > System Menu
System Stamp
[System Menu/Counter] key > [Security Settings] > "System Stamp"
Printing Jobs
[System Menu/Counter] key > [Security Settings] > "System Stamp" [Printing Jobs]
Configure settings for stamps when a document is printed.
After configuring the setting, return to the Copying Functions or Custom Box (Printing a Document) screen from System
Menu, and select the [Reset] key.
Item
Text Stamp Text Stamp
Edit Text
Stamp Method
Position
Font
Select whether to print a text stamp on all printing jobs.
Value: Off, On
NOTE
When [On] is selected, the Text Stamp settings cannot be changed when
printing.
Select a text string to be stamped from templates, or enter a maximum of
32 characters for the text string.
NOTE
Templates that have been set will appear. For details on registering templates,
refer to the following:
Text (Text Stamp) (page 8-32)
Select the stamp method for the text stamp.
Value: Each Print Page, Each Original Page
Set the text stamp position.
Value: Top Left, Top Middle, Top Right, Middle Left, Center, Middle Right,
Bottom Left, Bottom Middle, Bottom Right
NOTE
Specify the detailed stamp position using numeric values, and to set the stamp
position and angle when a stamp is placed on the back side of the paper in
duplex printing.
Set the font of the text stamp.
Value
Font: Courier, Letter Gothic
Size: Font sizes registered in Font (Text Stamp) are displayed.
Font (Text Stamp) (page 8-32)
Color: Black, Cyan, Magenta, Yellow, Red, Green, Blue, White
Style: None, Bold, Italic, Bold/Italic
Display Pattern: Transparent, Clipping, Overwrite
Density: 10 to 100% (in 10% increments)
8-71
Description