Kyocera 508ci Operation Manual page 391

Setup and Registration (System Menu) > System Menu
Item
Date Format
Time Zone
Energy Saver/Timer
[System Menu/Counter] key > [Device Settings] > [Energy Saver/Timer]
Item
Auto Panel Reset
Panel Reset Timer
Low Power Timer
Sleep Timer
Sleep Rules (models for
*1
Europe)
Select the display format of year, month, and date. The year is displayed in Western
notation.
Value: MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
Set the time difference from GMT. Choose the nearest listed location from the list. If you
select a region that utilizes summer time, configure settings for summer time.
Setting Date and Time (page 2-32)
If no jobs are run for a certain period of time, automatically reset settings and return to
the default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
For setting the time until the panel is automatically reset, refer to the following:
Panel Reset Timer (page 8-8)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto
Panel Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
Set amount of time before entering the Low Power mode.
Value: 1 to 120 minutes (1 minute increments)
Low Power Mode (page 2-43)
Set amount of time before entering Sleep.
Value: 1 to 120 minutes (10 minutes increments)
Select whether to use the Sleep mode for the following functions individually:
• ID Card Reader
• Application
Value: Off, On
NOTE
If the sleep condition is not turned off, the ID card cannot be recognized.
Description
Description
*2
8-8