Simple Login Settings - Kyocera 508ci Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Simple Login Settings

The simple login function allows users to log in simply by selecting a user name. Users must be registered in advance to
use this functionality.
NOTE
• For user registration, refer to the following:
Adding a User (Local User List) (page 9-7)
• To use Simple Login, User Login Administration must be enabled in "Enabling User Login Administration".
Enabling User Login Administration (page 9-3)
• When the guest authorization setting is enabled, the Simple Login screen is not displayed.
Enabling Simple Login
1
2
Display the screen.
1
[System Menu/Counter] key > [Job Accounting/Authentication]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name
358ci
408ci
508ci
2
Select "User Login Setting" [Simple Login].
Configure the settings.
Select [On] or [Off].
Login User Name
3500
4000
5000
9-27
Login Password
3500
4000
5000