Connector And Led Information; I/O Connector Signal Descriptions - National Instruments DAQ X Series User Manual

Connector and LED Information

The I/O Connector Signal Descriptions and
contain information about X Series connector signals and power. Refer to
Appendix A,
pinouts.
The
Pinout
connector on PCI Express devices.
The
READY and ACTIVE LEDs.

I/O Connector Signal Descriptions

Table 3-1 describes the signals found on the I/O connectors. Not all signals
are available on all devices.
© National Instruments
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Device-Specific Information, for device I/O connector
PCI Express Device Disk Drive Power Connector
sections refer to X Series PCI Express device power and the RTSI
USB Device LED Patterns section refers to the X Series USB device
3-1
3
+5 V Power Source sections
and RTSI Connector
X Series User Manual