Din Rail Mounting - National Instruments DAQ X Series User Manual

Chapter 1 Getting Started

DIN Rail Mounting

Complete the following steps to mount your USB X Series device to a
DIN rail using the USB X Series mounting kit with DIN rail clip (part
number 781515-01 not included in your X Series USB device kit).
1.
2.
1 DIN Rail Clip
X Series User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Fasten the DIN rail clip to the back of the backpanel wall mount
using a #1 Phillips screwdriver and four machine screws (part
number 740981-01), included in the kit as shown in Figure 1-4.
Tighten the screws to a torque of 0.4 N · m (3.6 lb · in.).
Figure 1-4. Attaching the DIN Rail Clip to the Backpanel Wall Mount
Clip the bracket onto the DIN rail as shown in Figure 1-5.
2 DIN Rail Spring
Figure 1-5. DIN Rail Clip Parts Locator Diagram
1-6
1
2
3
3 DIN Rail
ni.com