Scc Accessories; Bnc Accessories - National Instruments DAQ X Series User Manual

SCC Accessories

SCC provides portable, modular signal conditioning to your DAQ system.
Use an SHC68-68-EPM shielded cable to connect your X Series device to
an SCC module carrier, such as the following:
•
•
•
You can use either connector on MIO X Series devices to control an SCC
module carrier with NI-DAQmx.
PCI Express users should consider the power limits on certain SCC modules without
Note
an external power supply. Refer to the specifications document for your device, and the
PCI Express Device Disk Drive Power Connector
LED Information, for information about power limits and increasing the current the device
can supply on the +5 V terminal.
Note (NI 6356/6358/6366/6368 Devices)
support SCC.
Refer to the SCC Configuration Guide, available by going to
info

BNC Accessories

You can use the SHC68-68-EPM shielded cable, to connect your DAQ
device to BNC accessories, such as the following:
•
•
•
•
You can use one BNC accessory with the signals on either connector of
your X Series device. You can use two BNC accessories with one X Series
device by using both connectors.
© National Instruments
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SC-2345
SC-2350
SCC-68
Simultaneous MIO X Series devices do not
and entering the Info Code
BNC-2110—Provides BNC connectivity to all analog signals, some
digital signals, and spring terminals for other digital signals
BNC-2111—Provides BNC connectivity to 16 single-ended analog
input signals, two analog output signals, five DIO/PFI signals, and the
external reference voltage for analog output
BNC-2120—Similar to the BNC-2110, and also has a built-in function
generator, quadrature encoder, temperature reference, and
thermocouple connector
BNC-2090A—Desktop/rack-mountable device with 22 BNCs for
connecting analog, digital, and timing signals
2-5
Chapter 2 DAQ System Overview
section of Chapter 3, Connector and
ni.com/
, for more information.
rdscav
X Series User Manual