Activating The Connection With The Processor Unit Of The Far-2Xx8 Series Radar - Furuno FMD-3100 Instruction Manual

1.4.3 Activating the connection with the processor unit of the FAR-
2xx8 series radar
1. Click [Radar] on the menu bar.
2. Check the check for each FAR-2xx8 series radar processor unit to be connected.
Setting range: [RAD111] to [RAD118]
The Equipment ID checked on this step is shown on the menu bar.
Note: Do not use [RAD001] to [RAD010].
3. Click the [Details] button to set the following items, referring to the table shown be-
low.
Item
[Equipment Name]
[Equipment Type
No.]
[SFID]
[System Alert ID]
1. INITIAL SETTINGS AND ADJUSTMENTS
RAD001 through RAD010 are not used.
Enter the name of the equipment.
Shows the equipment type number.
Keep the default settings.
The identification number that is assigned in the system is shown
in this field. Do not change the setting.
Remarks
1-19