Furuno FM-3000 Connection Diagram
Dsc position polling with fm-3000 and navnet vx2
Hide thumbs
Also See for FM-3000:
- Operator's manual (76 pages) ,
- Operations and information quick manual (2 pages)
Advertisement
Quick Links
DSC Position Polling with
FM-3000 and NavNet VX2
When any NavNet VX2 display is connected to the FM-3000 VHF radio, DSC
position reports can be received from another DSC capable VHF transceiver, then
shown on VX2's plotter as a waypoint. This capability allows two or more vessels
to transmit their position to each other via VHF, then r ecord that position
information as a waypoint on the VX2's plotter.
Advertisement
Related Manuals for Furuno FM-3000
Summary of Contents for Furuno FM-3000
- Page 1 DSC Position Polling with FM-3000 and NavNet VX2 When any NavNet VX2 display is connected to the FM-3000 VHF radio, DSC position reports can be received from another DSC capable VHF transceiver, then shown on VX2's plotter as a waypoint. This capability allows two or more vessels to transmit their position to each other via VHF, then r ecord that position information as a waypoint on the VX2's plotter.
- Page 2 Connection Diagram, 10.4" VX2 Use Optional 000-117-603 Cable to connect the VX2 to the RCA type connectors on the back of the F M-3000. Set the VX2's NMEA port to output RMC and GGA. RED NMEA In RCA Jack - White wire from Plotter to Center Conductor (+) and Black wire from plotter to Outer (-) BLACK...
- Page 3 Connection Diagram, 7" VX2 Use Optional 000-144-418 Cable to connect the VX2 to the RCA type connectors on the back of the FM-3000. Set the VX2's NMEA port to output RMC and GGA. RED NMEA In RCA Jack - White wire from Plotter...