Furuno FMD-3100 Instruction Manual page 48

1. INITIAL SETTINGS AND ADJUSTMENTS
Item
2 [New Group]
button
3 [Delete
Group] button
4 All extension
button
5 [+]/[-] button
6 [Group No.]
7 [Priority]
8 [Category]
9 [Group Text]
10 [Details] but-
ton
11 [Type No.]*
12 [Data Type]*
13 [Alert No.]*
14 [Alert Name]*
15 [+]/[-] button
(ALF)
16 Instance
data*
17 [Import]
button
18 [Export]
button
*: The columns are empty or in red for any of the following cases.
• An alert which is preset in another alert group.
• An alert which is not included in the alert definition.
• An ALR sentence is assigned an ALF alert number.
• The Priority or Category of the alert is different from the ones of the group.
3. To save the configuration, perform a consistency check, then save the configura-
tion data on the [Save and Sync] menu.
1-42
Add a new alert group. See section 1.8.2.
Delete an alert group. See section 1.8.4.
Click to open/close the detail setting window for all groups ([+]:
Open all groups, [-]: Close all groups).
Click to open/close the detail setting window for the selected
group ([+]: Open, [-]: Close).
Group number
The priority of the alert group (Alarm/Warning/Caution). The prior-
ity of all grouped alerts is the same.
The category of the alert group (A to C). The category of all
grouped alerts is the same.
Text shown on the display when an alert in an alert group occurs.
The number in "< >" means the number of alerts.
Change the settings for the alert group. See section 1.8.3.
The equipment type which generates the alert.
The alert sentence format (ALF or ALR). This is dependent on the
equipment connected to this system.
Alert number.
Alert Name.
Click to open/close the alert instance data ([+]: Open, [-]: Close).
This appears only when the alert sentence is ALF format.
Show/Close the instance data.
• [Instance ID]: The instance ID of the alert
• [Alert Description]: Contents of the alert instance.
Import the specified group setting.
Export the specified group setting.
Remarks