Furuno FMD-3100 Instruction Manual page 74

1. INITIAL SETTINGS AND ADJUSTMENTS
[Decimal Place]: Check the checkbox to show the value after decimal point.
[Mathematical Sign]: Check the checkbox to show the minus sign (-) when the value
is minus.
• Next Leg
• Pitch And Roll
[Title]: Enter the title of the component.
[Location]: Select the reference point for the pitch and roll from the pull-down list.
[Title (Pitch And Roll 1 / Pitch And Roll 2)]: Enter the text shown above [Pitch And
Roll 1 (or 2)] indicator.
[Type]: Select the object to show in the [Pitch And Roll 1 (or 2)]. Setting range: [Roll],
[Pitch].
[Primary Source]: Select the data source of [Pitch And Roll 1 (or 2)] indicator.
[Decimal Place]: Check the checkbox to show the value after decimal point.
[Mathematical Sign]: Check the checkbox to show the minus sign (-) when the value
is minus.
• Position Local Time
[Title]: Enter the title of the component.
[Latitude Label]: Enter the text to show at the left of the latitude value.
[Longitude Label]: Enter the text to show at the left of the longitude value.
[DATUM Label]: Enter the text that indicates the datum.
[Local Time Label]: Enter the text to show at the left of the time information.
1-68