Furuno FMD-3100 Instruction Manual page 12

Ecdis setting and adjustments for pcu-3010
Hide thumbs Also See for FMD-3100:
Table of Contents

Advertisement

1. INITIAL SETTINGS AND ADJUSTMENTS
5. Access the [Common Installation Setting] menu and open the [Peripherals] win-
dow again.
6. Select the Printer type from the [Printer Model] drop-down menu.
Setting option
[HP Officejet Pro 8000]
[HP Officejet Pro 8100]
[HP Officejet Pro 8210]
[HP Officejet 100 Mobile]
[HP Officejet 200 Mobile]
Note 1: For no printer, set [Printer Mode] to [HP Officejet 100 Mobile].
Note 2: The printer HP Officejet Pro 8000 Enterprise Printer can not be connected
to the PCU.
7. Select the port to which the printer is connected from the [Printer Port] drop-down
menu.
HP Officejet 100 Mobile/HP Officejet 200 Mobile/
Not Connected
HP Officejet Pro 8000/HP Officejet Pro 8100/
HP Officejet Pro 8210
• [USB]: Only the FMD-3100 connected to the printer can print.
• [Network]: FMD-3100s in the same network
can print. The IP address of the printer is
shown on the [Printer] screen. Do not
change the IP address.
8. To automatically print images captured with [Screenshot] function, check the
checkbox for [Auto Print out (SS)].
9. Select the chart data storage equipment from the [Connected] pull-down list in the
[Chart Service] field. In this case, the IP address appears below the [Connection]
item.
• [Not Connected]: Not connected to the chart data storage equipment.
• [FURUNO]: Connected to the FURUNO Gate-1.
• [NAVTOR]: Connected to the NAVTOR NavBox.
• [NeCST]: Not used.
10. To connect a service gateway to the PCU-3010, select [Connected] at [Service
gateway] then the IP address and the port number appear below the [Connected]
item. Do not change these settings.
11. Click [Save] on the info bar. Several confirmation messages appear. Click [OK] to
reboot the system. To discard all changes, click [Discard Changes].
1-6
Connect the printer to LAN1 port or USB port, and then set
the IP address of the printer to "192.168.31.241". For how to
set the IP address of the printer, see the operator's manual
of the printer.
Connect the printer to the USB port of the processor unit.
Printer
Remarks
Printer Port
[USB]
[USB], [Network]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents