Basic Operation; Controls Description; Display Unit - Furuno GP-3500F-D Operator's Manual

1.

BASIC OPERATION

1.1

Controls Description

1.1.1

Display unit

When you correctly execute an operation, the unit generates a beep. Invalid
operation causes the unit to emit three beeps.
Opens the BRILLIANCE
window.
Momentary press: Registers
own ship's
positions.
Long press:
Marks man
(more than
overboard
3 seconds)
position.
Opens the DISPLAY MODE
screen.
Opens the SHIFT window
(sounder).
Opens the ECHO SOUNDER
RANGE window.
Enlarges/shrinks display.
• Enters numeric data.
• Enters mark.
• Selects menu item.
Opens the CHANGE MARK
COLOR window.
• Displays/erases the cursor.
• Switches + to - and vice vevsa.
• Switches N to S, E to W and
vice vevsa.
Moves own ship's position
or cursor position to center.
Card slot
BRILL
SAVE
WPT
MOB
DISP PROG
SHIFT
RANGE
ZOOM
IN
ZOOM
OUT
1 2
4 5
T
7 8
0
MARK
VRM
COLOR
CURSOR
CENTER
ON/OFF
Turns power on/off.
Opens the SAVE WPT window.
POWER
Sets/releases the destination.
GOTO
Executes program assigned.
MENU
Opens/closes the main menu.
GAIN
Opens the GAIN window (sounder).
ENTER knob
Push: Registers numeric data
or operation.
Rotate: Selects menu items.
• Silences the alarm.
CLEAR
• Erases marks and waypoints.
• Clears alphanumeric data.
3
6
Mesures the bearing and range
D
9
between two points.
Opens the CHANGE SHIP'S
TRACK COLOR window.
TRACK
COLOR
Shows the VRM.
PLOT
INTVL
Changes the track plotting method
and plotting interval.
Trackball
• Moves the cursor.
• Selects the menu item.
Control panel
1-1