Furuno FMD-3100 Instruction Manual page 75

[Latitude Source]: Select the data source of the latitude.
[Longitude Source]: Select the data source of the longitude.
[DATUM Source]: Select the data source of the datum.
[Local Time (Time) Source]: Select the data source of the time information.
[Local Time (Date) Source]: Select the data source of the date information.
[Sensor Name Source]: Select the appropriate sensor name source.
• Track Order
[Title]: Enter the title of the component.
• Two Dimension Plotter
[Title]: Enter the title of the component.
[Source (X)]: Select the data source of the X-coordinate value.
[Source (Y)]: Select the data source of the Y-coordinate value.
[Label (Y)]: Enter the title of the Y-coordinate.
[Unit (Y)]: Set the unit of the Y-coordinate.
[Symbol]: Select the plot mark.
[Time Span]: Enter the time span for the plotter screen.
[Sample Interval]: Enter the sample interval for the plotter screen.
[Max Value (X)]: Enter the maximum value of the X-coordinate.
[Max Value (Y)]: Enter the maximum value of the Y-coordinate.
[Axis Point (X)]: Enter the axis point of X-coordinate.
[Axis Point (Y)]: Enter the axis point of Y-coordinate.
[Axis Type]: Select the axis type. [Under Left]: The axis point is located at the under
left of the screen. [Central]: The axis point is located at the center of the screen.
[Tick Label]: Check the checkbox to show the tick label.
1. INITIAL SETTINGS AND ADJUSTMENTS
1-69